Maintenance Points Of Automatic Packaging Machine

The maintenance points of the automatic packaging machine are divided into six parts. The maintenance of each part is essential to the normal operation of the automatic packaging machine. We will explain for you separately.

The maintenance of the film shaft on the automatic packaging machine

The maintenance of the film shaft is divided into two steps. First, check if the inflation nozzle is leaking. Second,check if the film tenon is moving normally. If there are problems with these two parts, spare parts should be replaced in time. When the automatic packaging machine is stopped for more than 8 hours, the shaft should be removed and laid flat to prevent the shaft from bending under the action of gravity.

Maintenance points of automatic packaging machine
Show you the position of inflation nozzle and film tenon on the film shaft

The maintenance of the film sending system on the automatic packaging machine

The film sending system should conduct daily inspections of the correction motor, photoelectric head motor and film release motor. If the timing belt is severely worn, it should be replaced in time. Whether the printer type head is heated normally and whether the photoelectric head is working normally, if any problems are found, replace it in time.

The maintenance of the bag former

On the automatic packaging machine, the former is mainly to check whether the collar position is loose, whether the bracket is firm, check whether each fixing screw is tightened, and the heat-resistant tape on the barrel should be replaced in time if it is severely worn.

The maintenance of the sealing system

The sealing system should clean the surface of the sealing block, keep it smooth and free of adhesion, the thermocouple connection is firm and not loose, and the wire is not worn. If any problem is found, replace it in time. The stretched belt should be checked for dust on the surface. In order to prevent slippage and maintain friction, it should be cleaned with a damp cloth.

Maintenance points of automatic packaging machine
Clean area on the sealing block

The maintenance of the mechanical structure

The mechanical structure should carry out lubrication treatment and anti-rust treatment for all movable parts, add lubricating oil to gears and grinding couplings, and apply anti-rust oil to other mechanical parts

Maintenance points of automatic packaging machine
The point need pay attention to when maintance the mechanical structure

The maintenance of the electrical system

The electrical system should be dust-free, and clean the electrical control box to prevent electrical equipment failure check whether the wiring is firm, and fasten it in time. Check whether the drive display is normal. Check if the liquid level of the air filter is in the normal position. Whether the solenoid valve is leaking.

Maintenance points of automatic packaging machine
The electrical system should be dust-free

The maintenance of automatic packaging machine focuses on daily care. The more careful you take care of, the longer it will be able to run normally. Under normal maintenance conditions, the automatic packaging machine of NEWIDEA MACHINERY can bring you gratifying benefits, and allow you to use it with confidence for a long time.

packaging machine factory supplier

发表评论

您的电子邮箱地址不会被公开。 必填项已用*标注

Get in touch

No.9 Samsung Road, Xiqing District, Tianjin , China.

+86 022 27928230

+86-13920157717

autopacking@newideapack.com

Welcome to contact us!