Jan. 03, 2019
Currently, whether in the production of pharmaceuticals, the food industry, and the daily chemical industry. Powder Packing Machines have a common application. China's powder packaging machines have been self-improving on the basis of the past, aiming at humanized operation, focusing on the perfect combination of product quality and appearance, and making great contributions to the development of the world powder packaging machine. .
After purchasing the powder packaging machine, it should also pay attention to its daily maintenance and maintenance, in order to ensure the normal operation of the equipment and extend the service life of the equipment. Below Vertical Packing Machine Supplier will analyze the major problems that need to be paid attention to in powder packaging machinery for everyone:
Lubrication work. It is necessary to regularly lubricate the gear meshing parts of the gears, the bearing oil filling holes and the moving parts with oil lubrication. The shifting machine is strictly prohibited to run without oil every shift. When filling the lubricating oil, be careful not to put the oil tank on the rotating belt to prevent damage caused by slipping or premature aging of the belt.
maintenance work. Before using the powder packaging machine, check the screws of each part, and there must be no looseness. Otherwise, it will affect the normal rotation of the whole machine. For the electrical parts, attention should be paid to waterproof, moisture-proof, anti-corrosion and anti-rat work. In order to ensure that the electrical control box and the terminal are clean to prevent electrical failure, after the shutdown, the two heat seal bodies should be in the open position to prevent the packaging material from being burnt.
cleaning job. After the equipment is shut down, the metering part should be cleaned in time. The heat sealer body should be cleaned frequently to ensure that the sealing lines of the packaged products are clear. The scattered materials should be cleaned up in time to facilitate the cleanliness of the parts and thus better extend them. The service life, as well as the dust in the electric control box should be cleaned frequently to prevent electrical faults such as short circuit or poor contact.
Copyright © Tianjin Newidea Machinery co., LTD. All Rights Reserved | Sitemap